Lab 6 Execution

How do you find T_c and what is Delta R & Delta C?
How do you find Actual Frequency?
How do you find error for resonance frequency?

It says in the lab manual that actual frequency = dialed frequency * r (where r is the ratio you calculated on execution sheet 3, and also entered it about the chart on the excel sheet)

I did not realize the the ratio was the r. Thanks!!!
Does anyone know how to get the T_c and error T_c?

which point on the graph would be the resonance frequency?

I believed the resonance frequency was what was calculated on page 13 with the 1/period. That worked for me and I guessed on the error but is there a formula we are suppose to plug-in to find the error.

-Does anyone know ow to figure out T_c capacitor and resistor and the errors. I watched the video and did what hey said but it is still not coming out right.

what was the INductance?

hey is anyone having a problem on the excel sheet...cuz when i typed in yes because my resistant and capacitor were consistant and it didnt accept it, then i plugged in "no" it still didnt accept or show green....i dont know what else to do...

how do you figure out the the value of Tc on the graphs...the one for the capacitor voltage and the one for resistor voltage?

For the excel sheet on the bottom left side the question that asks What is the resonance frequency measured from the graph? My answer i got was 1.67E3 and it green up. Now my question is how do i find the error?

there is a new excel sheet to dload

for the graphs it says to indicate which trace is which voltage, however i forgot to do this in lab. can anybody please explain to me how to figure out which is which???? thanks!!

hey guys, i've been struggling with this one for a while =/

and also, my friend told me the Inductance value for Execution sheet #3 should be in the lab manual, but I don't see it o.o

if you guys could help me out, i would greatly appreciate that thanks

*oops i posted a new topic by accident

The inductance is on the top of page 2 in the picture, it is 2.5E-2 H

i don't get page 3 execution

my frequency is 3000
how do i get the question below (1/period) ??

and how do we get the ratio ??

plzzzzzzz help me

how to caculate actual freq?