# Lab 6 Execution

## Lab 6 Execution

How do you find T_c and what is Delta R & Delta C?
How do you find Actual Frequency?
How do you find error for resonance frequency?

cutiepie
Guest

## Actual Frequency

It says in the lab manual that actual frequency = dialed frequency * r (where r is the ratio you calculated on execution sheet 3, and also entered it about the chart on the excel sheet)

Kathleen

Posts : 42
Join date : 2008-12-18

## Thank U so Much

I did not realize the the ratio was the r. Thanks!!!
Does anyone know how to get the T_c and error T_c?

cutiepie
Guest

## Re: Lab 6 Execution

which point on the graph would be the resonance frequency?

123
Guest

## Resonance Frequency

I believed the resonance frequency was what was calculated on page 13 with the 1/period. That worked for me and I guessed on the error but is there a formula we are suppose to plug-in to find the error.

-Does anyone know ow to figure out T_c capacitor and resistor and the errors. I watched the video and did what hey said but it is still not coming out right.

cutiepie
Guest

## Re: Lab 6 Execution

what was the INductance?

4580
Guest

## the first three yes or no answers

hey is anyone having a problem on the excel sheet...cuz when i typed in yes because my resistant and capacitor were consistant and it didnt accept it, then i plugged in "no" it still didnt accept or show green....i dont know what else to do...

guest 00
Guest

## Tc on the graphs

how do you figure out the the value of Tc on the graphs...the one for the capacitor voltage and the one for resistor voltage?

guest_01
Guest

## Resonance Frequency

For the excel sheet on the bottom left side the question that asks What is the resonance frequency measured from the graph? My answer i got was 1.67E3 and it green up. Now my question is how do i find the error?

GUEST786
Guest

## not lighting up

there is a new excel sheet to dload

yo
Guest

## Re: Lab 6 Execution

for the graphs it says to indicate which trace is which voltage, however i forgot to do this in lab. can anybody please explain to me how to figure out which is which???? thanks!!

helpp
Guest

## error of calculated resonance frequency + inductance

hey guys, i've been struggling with this one for a while =/

and also, my friend told me the Inductance value for Execution sheet #3 should be in the lab manual, but I don't see it o.o

if you guys could help me out, i would greatly appreciate that thanks

*oops i posted a new topic by accident

:)
Guest

## Re: Lab 6 Execution

The inductance is on the top of page 2 in the picture, it is 2.5E-2 H

helpp
Guest

## Re: Lab 6 Execution

i don't get page 3 execution

my frequency is 3000
how do i get the question below (1/period) ??

and how do we get the ratio ??

plzzzzzzz help me

aa
Guest

## Re: Lab 6 Execution

how to caculate actual freq?

merry
Guest

## which trace is which voltage

I did not find which trace was which voltage on both of the graphs... any help?

graph
Guest

## Execution Ans.

T_c is .0001, it is the same for everyone because we all should have used the same capacitance and resistance which were 10e-7 and 1,000, so you just mulitple them.
T_c resistance find it the same way and the error is the same
error for T_c is .000014

ratio is measured frequency over the frequency you think it is on the generator. my ratio was about 1.09. To measure the frequency, find the period of the graph on the oscilloscope and do 1 over that.

To find actual frequency numbers just multiple your first column numbers by the ratio you calculated. Your resonance frequency is the number that has the highest Vr which you should already know from the calculated frequency you did for the ratio.
error for graph res frequency is sqrt(((deltaL/L)squared)+((deltaC/C)squared) then that number times your resonance frequency.

calculated res freq is in the pre lab which is 3183. error is the same as the one for the other res freq. but very imporatant is that ou have to multiple that number by 1/2 and then 3183.

good luck

NOREALNA
Guest

## help on error of calculated freq

Hey sorry guys but I cant figure out the error of the calculated frequency. Ive tried everything and nothing has worked whatsoever. I got the other error but for some reason, excel wont accept anything that I type. Will appreciate greatly!!! thank youu

MONEY23
Guest

## VR

OK so if VR= VB*(e^(-t/RC)) what is VB and/or how do we find it?

almost
Guest

## Re: Lab 6 Execution

I didn't realize that we had to figure out which trace is which in lab. Can I get some help on this one?

Tanya
Guest

## Re: Lab 6 Execution

I cannot figure out the error of the frequency from the graph either- what was posted earlier was incorrect. Any help guys? Thanks

Tanya
Guest