leb report 7 execution
2 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Question 8
sqrt((Deltak/k)^2+(2*Deltax/x)^2)*PE_max
needs to be
sqrt((Deltak/k)^2+(2*Deltax_0/x_0)^2)*PE_max
if you're just copying and pasting.
needs to be
sqrt((Deltak/k)^2+(2*Deltax_0/x_0)^2)*PE_max
if you're just copying and pasting.
johnson- Guest
Re: leb report 7 execution
I don't believe the slope goes through the origin.
x0 is the displacement of the glider on the airtrack, I think it was either the ~10cm or the ~30cm. For which ever one you're figuring out
x0 is the displacement of the glider on the airtrack, I think it was either the ~10cm or the ~30cm. For which ever one you're figuring out
Guest01- Posts : 133
Join date : 2008-09-19
question6
w=0.5
delta w= 0.001
x_0= 0.3
delta x_0=0.003
all these information was given in the lab manual~
delta w= 0.001
x_0= 0.3
delta x_0=0.003
all these information was given in the lab manual~
jsyz- Guest
value of force for table 1
i'm having a problem with maple TA accepting the values i put in for the force in part 1. for the force i did m*g. my mass is in kg and g is 9.81. i put in the values
1.177
1.373
1.570
1.177 so i the significant figures isn't the problem. my slopes were correct except for the first one.
im not sure wuat i didnt wrong?
1.177
1.373
1.570
1.177 so i the significant figures isn't the problem. my slopes were correct except for the first one.
im not sure wuat i didnt wrong?
confused- Guest
Q 2
How do we calculate T? We need to use it to calculate Delta_T. It says T=constant * k^-0.5. What is the constant?
guest000- Guest
Page 2 of 2 • 1, 2
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|